|
Short-depth Digital Panel Meters
The NLS X Series are low cost, short-depth digital panel meters extending only one-half
inch behind the bezel, making them ideal for OEM equipment. These meters have LED or LCD
displays and are available in 100mV, 200mV, 1V, 2V, 10V, 20V, 100V, 200V, or 1000V ranges
(depending on the model). All X meters have proven popular in end-user applications where
low cost and high quality are requirements.
Applications
|
DC Voltage |
|
DC Current |
|
Ratio |
Options
|
Current measurement |
|
Ratio measurement |
|
Green, orange or yellow LEDs |
|
Special scaling |
|
Zero offset |
|
Custom face plates |
Features
|
Short-depth - 0.5 inches behind bezel |
|
Multiple options |
|
Inexpensive |
|
3 or 3½ digits |
|
0.56-inch red LED display |
|
0.3-inch or 0.5-inch LCD display |
|
1000 or 2000 counts full scale |
|
Accuracy's from ±0.2% to ±0.1% full scale |
|
Auto-zeroing |
|
Overload indication |
|
Bipolar / Unipolar operation |
|
Automatic polarity indication |
|
Polarity inhibit |
|
Low power consumption |
|
Easily changable ranges |
|
Presettable decimal point |
|
Standard Specifications
|
Operating Temperature:
0°C to 50°C ambient |
|
Weight metric: Two ounces (56.7 grams) |
|
Maximun Input Voltage: ±250V all ranges except 1000V, which
is ±1200V |
|
Common-Mode Voltage: -1.5V to +4V between signal LO and ower
ground |
|
Decimal Location: Internaljumper to any three or four
locations ±x.x.x.x. |
|
Scale Factor Control: ±5% full scale |
|
Update Rate: Three readings/second |
|
Temperature coefficient: .01% or reading/°C |
|
Settling Time: Two seconds for sull scale input change |
|
Common-Mode Rejection Ratio: 80 dB minimum |
|
Normal Mode Rejection Ratio: 40 dB minimum |
|
Warm-up Time: 10 seconds to rated accuracy |
|
Connector Type: Pin |
|
|
Specifications: (Click the Model ID for product details)
| Model |
|---|
| Range |
|---|
| Digits |
|---|
| Display |
|---|
| Decimal Locations |
|---|
| Overload Location |
|---|
| Unipolar or Bipolar |
|---|
| Accuracy |
|---|
| Input Impedance |
|---|
| Power |
|---|
| Weight |
|---|
| Green, Orange or Yellow LEDs |
|---|
| Current Measurement |
|---|
| Ratio Measurement |
|---|
| Zero Offset |
|---|
| Special Scaling |
|---|
| Mating Connector |
|---|
| X-32 |
|---|
| 100mV, 1, 10, 100, and 1000V |
| 3 |
| 0.56-inch LED |
| 3 |
| Displayblanks |
| Unipolar |
| ±0.2% F.S. |
| 1000MW, 0.1v; 1MW, 1, 10, and 100V; 4MW, 1000V |
| +5Vdc, ±5% @ 175mA |
| 2 ounces (56.7 grams) |
| Option |
| Option |
| Option |
| Option |
| Option |
| P/N 53-106 |
| X-34 |
|---|
| 200mV, 2, 20, 200, and 2000V |
| 3½ |
| 0.56-inch LED |
| 4 |
| Positive=+1, Negative=-1 |
| Bipolar |
| ±0.1% F.S. |
| 1000MW, 0.2v; 1MW, 2, 20, and 200V; 4MW, 1000V |
| +5Vdc, ±5% @ 200mA |
| 2 ounces (56.7 grams) |
| Option |
| Option |
| Option |
| Option |
| Option |
| P/N 53-106 |
| X-35 |
|---|
| 200mV, 2, 20, 200, and 2000V |
| 3½ |
| 0.3-inch LCD |
| 3 |
| Positive=+1, Negative=-1 |
| Bipolar |
| ±0.1% F.S. |
| 1000MW, 0.2v; 1MW, 2, 20, and 200V; 4MW, 1000V |
| +5Vdc, ±5% @ 6mA |
| 2 ounces (56.7 grams) |
| - |
| Option |
| Option |
| Option |
| Option |
| P/N 53-106 |
| X-37 |
|---|
| 200mV, 2, 20, 200, and 2000V |
| 3½ |
| 0.6-inch LED |
| 3 |
| Positive=+1, Negative=-1 |
| Bipolar |
| ±0.1% F.S. |
| 1000MW, 0.2v; 1MW, 2, 20, and 200V; 4MW, 1000V |
| +5Vdc, ±5% @ 6mA |
| 2 ounces (56.7 grams) |
| - |
| Option |
| Option |
| Option |
| Option |
| P/N 53-106 |
|
